Solving the Connection Problem
Large grain storage and processing projects use multiple conveyors in series. Each machine handles one section of the conveying line. But the connections between machines often cause problems. Height differences, direction changes, or speed mismatches can lead to jamming or spillage. Our grain transfer conveyor solves this connection problem. It is a short-distance transfer machine. It bridges two conveyor lines. It changes the grain flow direction and completes the transition between processes. Think of it as an overpass for grain. It guides grain smoothly from one line to another. It changes direction and adjusts height. The whole conveying process runs without interruption. Our engineering team noticed that many line failures happen at equipment connections. So we developed this machine specifically to fix this weak point.
Standard Length with Matching Specifications
The grain transfer conveyor has a standard length of 8 meters. You can order custom lengths based on the distance between your two conveyor lines. The belt width is 800 mm. This matches most main-line conveyor widths. The conveying capacity is 100 tons per hour. This matches the capacity of mainstream conveying equipment. The machine does not become a bottleneck in the line. The belt speed stays under 2.5 m/s. This matches upstream and downstream belt speeds. It prevents material buildup or stretching caused by speed differences. The conveying height adjusts from 1.8 to 3.7 meters. This covers most height differences between discharge and intake points. The power setup includes a 4.0 kW conveyor motor. The telescopic motor delivers 1.5 kW for adjusting the intake position.

Sealed Transfer Point Prevents Spills
The grain transfer conveyor pays special attention to sealing at the transfer point. When grain falls from one belt to another, a poorly designed transfer point can cause spillage and dust. We use enclosed guide chutes at the transfer point. Grain moves through a fully enclosed channel from upstream to downstream. Nothing spills out. No dust escapes. The guide chute has wear-resistant liners inside. These liners withstand long-term grain flow without damage. The intake end adjusts to match the upstream discharge height and position. This ensures proper alignment. Before shipping, our quality team runs a transfer seal test. We run the belt at full capacity and check all guide chute seams for leaks. We also measure machine noise levels against standards.
Zhongmao Ruitong does more than supply single machines. We design complete grain conveying solutions. This machine is an important part of our system packages. We offer a one-year warranty on the whole machine. The wear-resistant liners get one free replacement. Each shipment includes standard connection dimension drawings. Your installation team can complete on-site connections quickly. For overseas projects, we customize the interface dimensions based on your existing conveyor brand and model. This ensures seamless integration.
one-stop solution
professional team
high quality
Technical Parameters
|
Parameter |
Value |
|
Equipment Name |
Grain transfer conveyor |
|
Conveyor Length |
8 m (customizable) |
|
Belt Width |
800 mm (customizable) |
|
Conveying Capacity |
100 t/h |
|
Belt Speed |
≤ 2.5 m/s |
|
Conveying Height Range |
1.8 - 3.7 m |
|
Conveyor Motor Power |
4.0 kW |
|
Telescopic Motor Power |
1.5 kW |
|
Special Design |
Enclosed guide chute, wear-resistant liners |
Hot Tags: grain transfer conveyor, China grain transfer conveyor manufacturers, suppliers, factory, Grain Surface Walkway Panel, Grain Transfer Conveyor, Mobile Side Discharge Grain Machine, Mobile Telescopic Incline Grain Belt Conveyor, On Floor Grain Aeration Duct, Portable Incline Grain Belt Conveyor
