If the centrifugal fan of the mobile cleaning screen fails to start or takes an excessively long time to start, do not panic; the following information may help you resolve the issue.
Startup problems with the mobile cleaning screen may stem from issues with the fan itself - such as the motor failing to drive the mechanism properly or the motor's rated power being too low. In such cases, the motor should be replaced with a suitable one. Alternatively, friction or obstructions on the rotor could be causing it to seize. Therefore, the rotor must be inspected to identify and rectify the specific cause; this ensures the fan starts correctly and minimizes the risk of malfunctions.
Oversized material (the product retained on the screen) is discharged through the outlet at the tail end of the drum. The tumbling and rolling action of the material inside the drum dislodges particles stuck in the screen apertures, thereby preventing clogging. Drum sand screens, drum screening machines, and drum screens share virtually identical operating principles and structural designs; differences in terminology arise primarily from how people perceive and name them. In the mobile cleaning screen, once material enters the screening drum, it is subjected to the impact and conveying action of rotating paddles. These paddles break up material clumps and propel the material in a circular motion along the inner surface of the drum. Under the influence of centrifugal force, particles smaller than the screen apertures pass through quickly and are discharged from the bottom of the machine, while a cleaning brush positioned against the drum continuously clears away any material adhering to the screen surface.
