Can a Crawler Grain Reclaimer be used in small grain storage facilities?

Nov 18, 2026

Leave a message

Daniel Brown
Daniel Brown
Grain Farm Operations Advisor, who tests and uses Zhongmao Ruitong’s machinery for large-scale grain intake and storage on his family farm. Shares practical, on-site feedback on equipment reliability for agricultural operators.

Hey everyone, it’s Sam here, and I’ve been getting a ton of questions lately from small grain storage facility owners—you know, the ones with 10,000 to 50,000 bushels (way smaller than the big silo farms I usually work with) asking: “Can that big Crawler Grain Reclaimer Machine actually work for us?” Full transparency, I used to side-eye these machines for small setups too—figured they were just for the mega-ops with 100,000+ bushels and teams of 5—but over the last year, I’ve walked three different small grain co-ops and family farms through testing and using these reclaimer units, and I’m here to spill the tea. Let’s break it down without the jargon, because no one’s got time for that.

First, let’s get one thing straight: a crawler grain reclaimer isn’t just a beefed-up piece of equipment for huge operations. It’s a self-propelled unit on tracks (hence “crawler”) that drives across grain piles, scrapes grain off the bottom and sides of the pile, and transfers it to your conveyor system or truck—no shovels, no tractors with loaders that damage the bin floor, no workers shoveling until their arms feel like jelly. But for small facilities (I’m talking single or small clusters of bins, not the 20-bin mega-complexes), space is tight, budget is tighter, and downtime costs way more than “just fixing a machine.” So does this fit? Let’s start with the biggest pain point for small ops: wasted grain. Most small storage places have gaps along bin walls, corners, and the “dead zone” where grain sits right next to the floor because hand tools can’t reach it. I had a client in Iowa last month—family farm with two 15,000-bushel bins for corn and oats—who was losing about 8% of their grain every time they emptied a bin. That’s 1,200 bushels per bin, and at $6 a bushel? That’s $7,200 in lost grain annually.

I brought in a crawler grain reclaimer for a two-week trial, and we knocked that waste down to less than 1%. How? The crawler’s low-profile design—only 18 inches high—glides along the bin floor without scraping it (no damage there, which saves on repair costs), and its rotating scraper arm gets right into those corner gaps. One thing I love about our Crawler Grain Reclaimer Machine specifically? Its tracks are narrow enough to fit through a standard 36-inch bin access door—no need to take apart bin walls or build a custom entry, which is a game-changer for small facilities that don’t have construction crews on call. I’ve heard horror stories of guys trying to fit big mobile equipment into small bins and having to saw off door frames; with this crawler, you just drive it right through the standard access door, no mods needed.

Mobile Telescopic Grain ConveyorChain Scraper Grain Scraper factory

But wait—let’s not pretend there’s zero learning curve. Small ops don’t have a dedicated maintenance guy or a crew that’s trained on heavy equipment, right? The crawler is super user-friendly: it has a wireless remote, so one guy can drive it from the bin door, adjusting speed and scraper height without being stuck inside the dusty bin the whole time. No more breathing in grain dust for 8 hours straight. Most small facility staff can pick it up in 20 minutes tops—we even had a 19-year-old farm kid who’d only ever driven a ATV figure it out after a quick demo. That’s a huge win because if you have to hire a specialist every time you use it, the cost eats into the grain savings.

Now, let’s compare it to other options small facilities usually go for, because that’s how you make the call. The main alternative is usually hand tools or a Chain Scraper Grain Scraper that’s mounted permanently to the bin floor. Permanent chain scrapers are great for super consistent, long-term operations, but they’re expensive upfront—like $15,000-$20,000 for a single small bin—plus they can’t be moved if you have different grains or need to repurpose the bin. For small ops that might use bins for corn one year, soybeans the next, or even just store seed sometimes, a permanent scraper is a waste of money. Then there’s the Mobile Grain Reclaimer—I used to recommend this over crawlers for small spaces, but it only works if you have external space to maneuver, and it’s taller, so you can’t get it into narrow bin aisles. The crawler fits inside the bin, which is the key difference. Another option is a Mobile Telescopic Grain Conveyor, but that just moves grain—you still have to get it loose from the pile in the first place. The crawler does both: loosens it and moves it.

Here’s the thing that made my Iowa client switch from a mobile reclaimer to the crawler: their bin aisle was only 4 feet wide. The mobile reclaimer was too wide to fit, so they had to park it outside the bin and run a conveyor through the door, which spilled grain all over the aisle and was slow. The crawler’s 22-inch width (when tracks are retracted) fits perfectly into that 4-foot aisle, so there’s no spillage, and it can reach every corner of the bin. They also used to have to pay a local guy with a front loader to load out, but that cost him $1,000 per load—now he uses the crawler for free (well, after the initial cost, which he recouped in 8 months from no wasted grain and no loader fees).

Wait, but hold on—are there cases where it’s not worth it? Let’s be real, I don’t want to sell someone a machine that doesn’t fit their setup. If you have a bin smaller than 8,000 bushels, maybe not—you’d outspend the grain savings. But if your bins are 8,000 to 50,000 bushels, that’s the sweet spot. Also, if you only have one bin and empty it once a year, maybe stick with a cheaper Grain Scraper hand tool—but if you empty 2+ bins a season, the crawler’s speed and lack of labor will save you way more. I also had a client in Ohio with three 20,000-bushel bins; he was doing 10-hour load outs with 3 guys shoveling, and now he’s done in 2 hours with 1 guy running the crawler. No more overtime, no more sore backs, no more calling in extra help.

Another point: maintenance. Small facilities can’t afford downtime, and the crawler is designed with simple, replaceable parts—no fancy electronics that need a $500 repair. The tracks are rubber, so they don’t damage bin floors (unlike metal tracked equipment), and the scraper arm is coated in a non-scratch material so you don’t have to replace it every year. We’ve got a 5-year-old crawler in operation at a small co-op in Indiana, and the only maintenance they’ve done is change the oil and tighten the track bolts—$200 total, nothing crazy. Compare that to a permanent chain scraper, which needs to be serviced every 6 months and has parts that cost $1,000+ when they break.

I think the biggest myth I keep hearing is that crawler grain reclaimers are just for big farms. No—big farms have the budget, but small farms and storage co-ops have the most to gain from not wasting grain and cutting labor costs. Let’s do the math quick: if you have two 15,000-bushel bins, losing 8% grain each year is 2,400 bushels. At $6 a bushel, that’s $14,400. The crawler is priced around $12,000 (wait, no fine print, that’s the actual ballpark for small units), so you recoup the cost in less than a year. That’s a no-brainer, right?

But let’s not gloss over the fine print. You have to make sure the bin is structurally sound—no cracks in the floor that would jam the crawler tracks. Also, you need to have a way to transfer the grain from the crawler to trucks or another bin, which is easy with a mobile telescopic conveyor or a standard auger. We usually recommend pairing the crawler with our mobile telescopic conveyor for small setups, because you can connect them right at the bin door and move grain straight to the truck without lifting it. One thing I always tell people: measure your bin access door and aisle first. If the door is 36 inches or wider and the aisle is at least 4 feet, the crawler fits. If it’s smaller, maybe a mobile reclaimer or hand tools make more sense.

I’ve spent the last 3 years working with small grain operations, and I’ve seen so many of them throw money at hand tools that don’t work, or permanent equipment that’s too expensive. The crawler grain reclaimer fills a gap no one was talking about before—equipment that’s powerful enough to cut down waste and labor, but small enough to fit in their tight spaces and simple enough to use without a dedicated operator. My Iowa client texted me last month saying he used the crawler to load out his corn in half the time, and he didn’t have to hire two extra guys to help. That’s the win we all want, right?

Here’s the bottom line: if you’re a small grain storage facility with bins between 8,000 and 50,000 bushels, and you’re tired of wasting grain, spending too much on labor, or damaging your bin floors with tractors, the crawler grain reclaimer is worth checking out. It’s not a one-size-fits-all, but it’s way more flexible than most people think. I’ve had guys come in saying “it’s too big” and leave saying “why didn’t I try this sooner?”

If you’re interested in learning more or testing one out, hit us up—we can send a rep to your facility to measure your bins, walk you through how it works, and even set up a trial run so you can see for yourself. No pressure, just facts. Don’t keep losing money to wasted grain or burning out your staff with backbreaking work. The crawler grain reclaimer might just be the solution you didn’t know you needed.

References:

  1. Grain Storage Waste Reduction Guidelines. USDA Agricultural Marketing Service, 2022.
  2. Small Farm Equipment Efficiency Report. National Agricultural Statistics Service, 2023.
  3. Mobile and Crawler Grain Handling Equipment: Space Compatibility. Farm Equipment Magazine, 2024.
  4. Grain Scraper and Reclaimer Maintenance Best Practices. American Society of Agricultural Engineers, 2021.
Send Inquiry
Send Inquiry